A portable basketball hoop is a great way to have your own basketball court in your backyard. However, if you have been using a portable hoop and want to switch to an inground hoop, the process of converting your portable hoop into an inground one can be a bit tricky. Fortunately, with the right tools and a bit of know-how, you can easily and safely convert your Lifetime portable basketball hoop to an inground hoop.
What You Will Need
Before you begin the process of converting your portable basketball hoop to an inground hoop, it is important to make sure you have all the necessary tools and supplies. Here is a list of the items you will need:
• Cement
• Shovel
• Level
• Tape measure
• Drill
• Carpenter’s saw
• Bolts and screws
• Post hole digger
Step 1: Determine the Location of Your Inground Hoop
The first step in converting your portable basketball hoop to an inground hoop is to decide on the location of your new hoop. You will want to choose a spot where you have plenty of space to play, and that is level and free of obstructions. Once you have chosen the location, mark it with spray paint or a flag so you can easily identify it later.
Step 2: Dig the Hole
Once you have determined the location of your new inground hoop, you will need to dig a hole for the pole. Using a post hole digger, dig a hole that is at least 2 feet deep and 2 feet wide. You may want to consider digging a deeper hole, as this will make it easier to pour cement into and provide more stability for your pole.
Step 3: Prepare the Pole
Next, take the pole from your portable hoop and prepare it for installation. Using a carpenter’s saw, cut the pole to the desired length. You will want to make sure the pole is cut at the same level as the ground so that it is even with the surface. Once the pole has been cut, use a drill to make holes at the bottom and top of the pole for the bolts and screws.
Step 4: Attach the Pole to the Base
Now that the pole is prepared, you will need to attach it to the base. Place the base in the hole and make sure it is level. Then, use the bolts and screws to attach the pole to the base. Make sure the pole is securely fastened to the base.
Step 5: Fill the Hole With Cement
Once the pole is attached to the base, you will need to fill the hole with cement. This will provide extra stability and prevent the pole from shifting over time. Use a shovel to fill the hole with cement and make sure to pack it down firmly. Allow the cement to dry completely before moving on to the next step.
Step 6: Attach the Backboard
Once the cement has dried, you can attach the backboard to the pole. Make sure the backboard is level with the ground and attach it to the pole using the bolts and screws. Once the backboard is securely fastened to the pole, you are ready to start playing!
Conclusion
Converting a Lifetime portable basketball hoop to an inground hoop is not as difficult as it may seem. With the right tools and supplies, and a bit of know-how, you can easily and safely convert your portable hoop into an inground hoop. Just make sure to take your time and follow the steps outlined above and you should have no trouble converting your hoop.